18 diy Lamp bottle ideas

Make some colorful and trendy pendant lampshades for your home with just a plastic bottle and some decorative cord. Cut the bottle approximately in half, discard the bottom, and then cut off the narrow neck of the bottle. Starting at the narrow opening at the top, hot glue the cord around the opening. Keep gluing the cord to the bottle in a tight spiral until you have glued it all the way to the bottom. Trim and secure the tail end. choose no heat bulbs or LED.This item is a lamp made from a 750 ml bottle of Willett Pot Still Reserve bourbon whiskey. The bottle is filled with polished river rocks. The silver 8 ft cord exits through a hole drilled in the bottom of the bottle and is protected by a rubber grommet. There is a notch for the cord to pass through underneath the bottle. The switch is a pull chain style with the original cap/cork from this bottle attached. Willett is a delicious bourbon but unfortunately the bourbon is not included ?. This item may be purchased with or without the lampshade. Bulb is not included, 40 or 60 watt bulb recommended. Dimensions are as follows: Lamp Height with shade = 17 inches Shade bottom diameter = 10 inches Shade top diameter = 8 inches