17 diy Table with drawers ideas

TODAY I’M SHARING HOW TO TURN AN OLD DESK INTO PAINTED NIGHTSTANDS! [VIDEO] I see these old desks at thrift stores and garage sales and they make AMAZING nightstands once upcycled! #paintednightstands #siblog #salvagedinspirations #paintedfurniture #deskintonightstands #repurposeddesk TODAY I’M SHARING HOW TO TURN AN OLD DESK INTO PAINTED NIGHTSTANDS! [VIDEO] | Salvaged Inspirations

Free Woodworking Plans – Step by step guide on how to build this Three Drawer Console – Handmade Haven Three Drawer Console plans detailing step by step instructions on how to create a beautiful piece of furniture. This tutorial details steps on how to create a three-drawer console with pine wood perfect for the home entryway.

DIY Rustic Console Table | DIY Industrial Console Table | Free Console Table Plans | DIY Console table with free plans | How to build drawers the easy way | Free plans and step-by-step tutorial for industrial console table | What is the best prestain conditioner | DIY farmhouse furniture | #TheNavagePatch #DIY #FreePlans #DIYFurniture #Tutorial #Farmhouse #ConsoleTable #Industrial | TheNavagePatch.com This DIY Rustic Console Table is easy to build with our free plans, and it looks fantastic! A little rustic, a little industrial and all beauty!

how to install drawers on a DIY desk This DIY Modern Farmhouse desk with storage is a great beginner build! The simple plans will help you build your own desk in no time.

Create this DIY farmhouse desk with these step by step build plans. DIY Farmhouse Desk plans that will make your home office pop! Need an office farmhouse desk to spice up the home office? Look no more! These DIY Desk Plans will make your office come to life.

DIY Mid Century Modern Side Table / End Table | Modern Builds | EP. 69 – YouTube DIY Farmhouse Desk plans that will make your home office pop! Need an office farmhouse desk to spice up the home office? Look no more! These DIY Desk Plans will make your office come to life.

**Listed price is for one table** This Custom, Hand-made Farmhouse End Table is 19″Wx16.5″Dx26″H. Whether purchasing one or two of these tables, each solidly built piece will be a perfect addition to your living room, bedroom, or sitting room. We use locally sourced, pine lumber for our nightstands. Easy slide drawer gives room for storage while also allowing a smooth open and close! Each table comes fully assembled. ***photos shown in Provinical/antique white. Can be stained in one color, if desired.

art to do any less than 2 things at once. Touch?! I This DIY Rustic Console Table is easy to build with our free plans, and it looks fantastic! A little rustic, a little industrial and all beauty!

Build a beautiful small console table to add storage and decor to your home. This DIY farmhouse console table has two large drawers and two shelves. Perfect small space storage idea. Housefulofhandmade.com #ConsoleTable #HomeDecor #DIY #WoodWorking #Farmh Build a beautiful small console table to add storage and decor to your home. This DIY farmhouse console table has two large drawers and two shelves. Perfect small space storage idea.

DIY Modern Farmhouse Desk with drawers and shelves to build for your home office and organize. The plans, video and full tutorial will lead you step by step. These DIY Desk Plans will make your office come to life. #anikasdiylife This DIY Modern Farmhouse desk with storage is a great beginner build! The simple plans will help you build your own desk in no time.

DIY Nightstand | build this 3 drawer bedside table with plans from Bitterroot DIY I probably should have done this project forever and a half ago (like before I started re-doing our entire house), but I FINALLY got around to building a few workbenches and setting up my shop. And by “shop” I mean the garage. My goal is to maximize shop space and storage, but still be able []

In this DIY tutorial, learn how to distress furniture with stain. This easy furniture distressing technique works well for painted furniture and raw wood. A chip brush, rag, and wood stain are the materials needed. #distressfurniture #woodstain #farmhousestyle #diy Learn how to distress painted furniture with stain or wax. This technique makes existing or new furniture look old, aged, and shabby chic.

Learn how to build this DIY Nightstand with Drawers with easy-to-follow plans and how-to by Shanty2Chic. Learn how to distress painted furniture with stain or wax. This technique makes existing or new furniture look old, aged, and shabby chic.

Farmhouse Nightstand – DIY Nightstand Plans – Handmade Haven | DIY Farmhouse nightstand plans that will give your bedroom a Joanna Gaines farmhouse vibe. These free DIY nightstand plans are an easy step-by-step tutorial on how to recreate a farmhouse nightstand for your home.

Plans for building your own Shirley Console Table with MoreLikeHome.net I am helping with a bathroom design for a local church and as part of that project they needed a vanity/changing table. I sent a few style suggestions to the Renovation Director (I just made that title up, so don’t hold me to it 🙂 ) and our favorite was far and away the Shannon Console Table. The two problems we were that 1) we needed the table to fit a very specific space and couldn’t find anything just the right size, and 2) this table doesn’t even appear to be sold in the US. 🙂 So that left us one choice – building a custom piece! And so the Shirley Console Table was born. I named it Shirley myself. If you need help naming your children just let me know. I’m obviously a REALLY good namer. And I make my own verbs. Yep, I’m a full package. Now, down to business! Please read all the directions before beginning, and cut your pieces as you go, measuring before each cut. Use 2” screws or pocket holes with 1 1/4″ screws unless otherwise indicated. Always use glue. Pre-drill and countersink your screws. I typed these plans after building my piece and tried to double check all my numbers, but please watch out for typos. Measure lots to make sure things work out! And don’t forget to check out Ana White’s tip’s and suggestions for getting started! Shopping List: 11 – 1×2’s @ 8′ long 1 – 1×3 @ 8′ long 1 – 1×3 @ 10′ long 1 – 1×4 @ 8′ long 1 – 1×6 @ 8′ long 1 – 1×10 @ 6′ long 2×2 scraps 2 scrap plywood @ 10 5/8″ x 16 1/4″ 2 sets 16″ corner-mount drawer slides 2 knobs or pulls 2″ screws 1 1/4″ pocket screws (optional, only if you have a Kreg Jig) 1 1/4″ screws 1 1/4″ finishing nails wood glue Cut List: (A) 4 – 1×3 @ 33 3/4″ (leg front) (B) 4 – 1×2 @ 33 3/4″ (leg side) (C) 6 – 1×2 @ 18″ (side rails) (D) 6 – 1×2 @ 29 3/4″ (front & back rails) (E) 9 – 1×2 @ 16 1/2″ (shelf slats) (F) 1 – 1×6 @ 27 3/4″ (back panel) (G) 2 – 1×2 @ 27 3/4″ (back trim) (H) 2 – 1×6 @ 15″ (side panel) (I) 4 – 1×2 @ 15″ (side trim) (J) 2 – 1×2 @ 27 3/4″ (front trim) (K) 1 – 2×2 @ 5 3/4″ (drawer divider) (L) 2 – 1×2 @ 18 3/4″ (side drawer supports) (M) 1 – 2×2 @ 18 3/4″ (middle drawer support) (N) 2 – 1×4 @ 10 5/8″ (drawer back) (O) 2 – plywood scraps @ 10 5/8″ x 15 1/2″ (drawer bottom) (P) 4 – 1×4 @ 16 1/4″ (drawer sides) (Q) 2 – 1×6 @ 12 1/8″ (drawer front) (R) 2 – 1×10 @ 34 3/4″ (table top) (S) 1 – 1×3 @ 34 3/4″ (table top) Dimensions: (like I mentioned, I built this to fit snug-as-a-bug in a specific space. that’s why none of my measurements are nice round numbers.) Step 1: Assemble the legs. Attack the leg fronts (A) to the leg sides (B) to assemble all four legs. I did this by drilling through the leg front into the the leg side and attaching the pieces with 2″ nails and glue. Step 2: Attach the side rails. Drill through the side rails (C) into the leg sides and attach with 1 1/4″ nails & glue. The first rail should be flush with the top edge of the legs, the second should be spaced 5 1/2″ down from there, and the last should be 17 3/4″ down from there (which leaves 6″ underneath). Step 3: Attach front and back rails. Drill through the front & back rails (D) into the leg fronts and attach with 1 1/4″ screws and glue. Put the top rail flush with the top of the legs. Line up the bottom rails and second back rail with the side rails you attached in step 2. The second rail ON THE FRONT should be down 5 3/4″, NOT 5 1/2″ like the side rails. This will allow room for your drawer fronts. Step 4: Shelf slats Install the shelf slats (E) between the bottom set of front & back rails. You will have about 2″ between each slat. Use glue and either screw or nail through the rails and into then ends of each slat, or use a kreg jig to attach the slats from below. Step 5: Back Panel & Trim There are two ways you can do the back. The way I did it was to first attach the back panel (F) to the back trim (G) pieces using a Kreg Jig to create one solid back piece. Then I screwed through the back rails into the back piece and attached it with glue & 1 1/4″ screws. If you don’t have a Kreg Jig, you could instead cut a piece of plywood to 27 34″ x 8 1/2″ and use the one piece in place of the panel & trim. (note: the back panel is 5 1/2″, not the 5 3/4″ that is shown) Step 6: Side panels & trim Next attach the side panels (H) & trim (I) in the same way as the back panel & trim in step 5. Again, you can use the three pieces as I’ve drawn or replace it with a single piece of plywood cut to 15 x 8 1/2″. Repeat for the other side. (note: the side panel is 5 1/2″, not the 5 3/4″ that is shown) Step 7: Front trim & drawer divider Next attach the front top & bottom trim (J) by drilling through the front rails into the trim. Use glue & 1 1/4″ nails. Then attach the drawer divider (K) using a Kreg Jig, or by drilling down through the trim & rails and using glue & 2″ nails. The divider should be centered, with 13 1/8″ on each side. Step 8: Drawer supports Next install your drawer supports. The side supports (L) should be attached flush with the inside edges of the legs in front & back, near the bottom of the drawer opening. Since our drawer boxes are shorter than the opening, you have have a good amount of wiggle room. Just make sure all your supports are at the same height. The middle support (M) should be at the same height and run from the drawer divider to the back of the unit. Measure to make sure the divider runs straight, it should have 13 1/8″ on each side. You can attach all the supports using a Kreg Jig, or by drilling through from the outside with 2″ nails and glue. Step 9: Drawer boxes First measure your drawer openings to be sure they are 13 1/8″ wide. It is important that your drawer boxes be 1″ narrower than the opening for your drawer slides to fit so adjust the drawer measurements if necessary. To assemble your box, start by attaching the drawer back (N) to the drawer bottom (O) using a kreg jig or screws & glue. Then attach the drawer sides (P) in the same way. Your box will look like this: Step 10: Drawer slides These drawers are designed to work with slides that mound on the bottom corners of the drawer box. Follow the package instructions to install them. (it shows the top in this picture, but it’s much easier to do this before the top is installed so you can see what you are working with) Once your box is installed properly, you can attach the drawer front (Q). The drawer front should be 12 1/8″ wide OR 1/4″ smaller than the opening. Double check your opening size and size your drawer front as necessary. I put glue on the front edges of the drawer box, center the drawer front in the opening, and then nail through the front into the box. (you will have 1/8″ gap all around the drawer) Step 11: Install the top If you have a Kreg Jig, start by connecting your table top boards (R) & (S) as show below to create one solid top piece. If you don’t have a Kreg Jig, just set the pieces on as shown below without attaching them together. Align the top on your table – you’ll have 1″ overhang on each side, 1″ in front, and 1/2″ in back. Use glue and nail or screw down through the top into the legs and sides of the table. Step 12 – Finishing Fill in any holes and let dry, then sand everything smooth. Finish with paint or stain and polyurethane. Add hardware and you are done! I don’t have any pictures of it in place at the church yet, so these will have to do for now…. This was my first time doing drawer slides. It took a few attempts, but they eventually turned out pretty good. 🙂 This project cost me about $85 including finishing supplies. Enjoy, and let me know if you give these plans a try!

Simple coffee table – If your living room is plagued by a sea of toys, job things, or other miscellany floating about, you require a coffee table with storage space. Guaranteed all those drawers are filled with stuff, however you ‘d never recognize due to the fact that it looks so beautiful as well as buttoned up! #coffe#coffetableideas#tableideas Did I mention this farmhouse herringbone coffee table was custom built? Similar, custom built tables start at $1,000 on Etsy and I’ve not seen any with this

Watch to the end… Did I mention this farmhouse herringbone coffee table was custom built? Similar, custom built tables start at $1,000 on Etsy and I’ve not seen any with this